33
5.4 IPv6 LAN Auto Configuration
Configure the IPv6 LAN Host options (see below) and then click
Save/Apply
.
DHCPv6 Server:
To enable DHCP for IPv6, select the
Enable DHCPv6 server
checkbox
þ
. This setting enables the router to assign IP settings
to every IPv6-capable LAN device (IPv6 clients).
RADVD:
Select the checkbox
þ
to enable the
R
outer
ADV
ertisement
D
aemon.
This provides information that IPv6 clients can use for autoconfiguration
according to the Neighbour Discovery for IPv6 protocol (RFC2461).
Enable MLD Snooping:
Enable by ticking the checkbox
þ
.
Standard Mode:
In standard mode, multicast traffic will flood to all
bridge ports when no client subscribes to a multicast
group
–
even if snooping is enabled.
Blocking Mode: In blocking mode, the multicast data traffic will be
blocked and not flood to all bridge ports when there are
no client subscriptions to any multicast group.
PDF created with pdfFactory Pro trial version
www.pdffactory.com
