Comtrend Corporation CT-6382T, User Manual

Page: 35 / 138

Disconnect if no activity
The CT-6382T can be configured to disconnect if there is no activity for a period of
time by selecting the
Dial on demand check box. When the checkbox is ticked, you
need to enter the inactivity timeout period. The timeout period ranges from 1
minute to 4320 minutes.
PPP IP Extension
The PPP IP Extension is a special feature deployed by some service providers.
Unless your service provider specially requires this setup, do not select it.
The PPP IP Extension supports the following conditions:
Allows only one PC on the LAN
The public IP address assigned by the remote side using the PPP/IPCP protocol
is actually not used on the WAN PPP interface. Instead, it is forwarded to the
PC’s LAN interface through DHCP. Only one PC on the LAN can be connected to
the remote, since the DHCP server within the ADSL VoIP IAD has a single IP
address to assign to a LAN device.
NAPT and firewall are disabled when this option is selected.
The ADSL VoIP IAD becomes the default gateway and DNS server to the PC
through DHCP using the LAN interface IP address.
The ADSL VoIP IAD extends the IP subnet at the remote service provider to the
LAN PC. That is, the PC becomes a host belonging to the same IP subnet.
The ADSL VoIP IAD bridges the IP packets between WAN and LAN ports, unless
the packet is addressed to the VoIP IAD’s LAN IP address.
Use Static IP Address
Unless your service provider specially requires this setup, do not select it.
If selected, enter your static IP address.
Enable PPP Debug Mode
Enable the PPPoE debug mode. The system will put more PPP connection
information in System Log. But this is for debug, please don't enable in normal
usage.
2. Click Next to display the following screen.
34