Comtrend Corporation CT-6382T, User Manual

Page: 131 / 138

Filter Name: User defined Filter Name.
Protocol:
Can take on any values from: TCP/UDP, TCP, UDP or ICMP
Source IP Address/Source Subnet Mask: Packets with the particular "Source IP
Address/Source Subnet Mask" combination will be accepted.
Source Port: This can take on either a single port number or a range of port
numbers. Packets having a source port equal to this value or falling within the range
of port numbers(portX : portY) will be accepted.
Destination IP Address/Destination Subnet Mask: Packets with the particular
"Destination IP Address/Destination Subnet Mask" combination will be accepted.
Destination Port: This can take on either a single port number or a range of port
numbers. Packets having a destination port equal to this value or falling within the
range of port numbers(portX : portY) will be accepted.
The WAN interface on which these rules apply needs to be selected by the user.
Examples:
1. Filter Name : In_Filter1
Protocol : TCP
Source Address : 210.168.219.45
Source Subnet Mask : 255.255.0.0
Source Port : 80
Dest. Address :NA
Dest. Sub. Mask : NA
Dest. Port : NA
Selected WAN interface: mer_0_35/nas_0_35
This filter will ACCEPT all TCP packets coming from WAN interface
mer_0_35/nas_0_35 with IP Address/Sub. Mask 210.168.219.45/16 having a
source port of 80 irrespective of the destination. All other incoming packets on this
interface are DROPPED.
130