42
The Device Setup page allows the user to configure the LAN interface IP address and
DHCP server. If the user would like this ADSL router to assign dynamic IP
addresses, DNS server and default gateway to other LAN devices, select the radio
box
Enable DHCP server on the LAN
to enter the starting IP address and end IP
address and DHCP lease time. This configures the router to automatically assign IP
addresses, default gateway address and DNS server addresses to each of your PCs.
Note 1: Enable DHCP Server Relay
will not display if Firewall is enabled in the
previous step.
Note 2:
The router’s default IP address is 192.168.1.1 and the default private
address range provided by the ISP server in the router is 192.168.1.2 through
192.168.1.254.
4. The following screen will be displayed. To enable the wireless function, select the
box (by clicking on it) and input the SSID. Then, click
Next
.
5. Click
Next
to display the WAN Setup-Summary screen that presents the entire
configuration summary. Click
Save/Reboot
if the settings are correct. Click
Back
if you wish to modify the settings.
Summary of Contents for CT-5361T
