51
IGMP Snooping:
Standard Mode:
In standard mode, multicast traffic will flood to all bridge ports when
no client subscribes to a multicast group – even if IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data traffic will be blocked and not
flood to all bridge ports when there are no client subscriptions to any multicast group.
Enable Enhanced IGMP:
Enable by ticking the checkbox
. IGMP packets between LAN ports
will be blocked.
Enable LAN side firewall:
Enable by ticking the checkbox
.
DHCP Server:
To enable DHCP, select
Enable DHCP server
and enter Start and End IP
addresses and the Leased Time. This setting configures the router to
automatically assign IP, default gateway and DNS server addresses to every PC
on your LAN.
Setting TFTP Server:
Enable by ticking the checkbox
. Then, input the TFTP
server address or an IP address.
Static IP Lease List:
A maximum of 32 entries can be configured.
To add an entry, enter MAC address and Static IP address and then click
Apply/Save
.
To remove an entry, tick the corresponding checkbox
in the Remove column and then click the
Remove Entries
button, as shown below.
Summary of Contents for AR-5310u
Page 1: ...AR 5313u AR 5310u Wireless ADSL2 Router User Manual 261056 076 Version A1 1 May 6 2016...
Page 50: ...49 5 2 6 SIP ALG This page allows you to enable disable SIP ALG...
Page 58: ...57 5 3 3 UPnP Select the checkbox provided and click Apply Save to enable UPnP protocol...
Page 66: ...65 A maximum of 100 entries can be added to the URL Filter list...
