Comtrend Corporation AR-5310u, User Manual

Page: 13 / 75

12
Note:
A malfunction is any error of internal sequence or state that will prevent the device from
connecting to the DSLAM or passing customer data. This may be identified at various times such
after power on or during operation through the use of self testing or in operations which result in
a unit state that is not expected or should not occur.
IP connected (the device has a WAN IP address from IPCP or DHCP and DSL is up or a static IP
address is configured, PPP negotiation has successfully complete – if used – and DSL is up ) and
no traffic detected. If the IP or PPPoE session is dropped for any other reason, the light is turned
off. The light will turn red when it attempts to reconnect and DHCP or PPPoE fails.
WiFi/WPS Button
Press and release WiFi-WPS button to activate WPS (make sure the WPS is enabled in
Wireless->Security page).
Press and hold WiFi-WPS button more than 10 seconds to enable/disable WiFi.