16
3.3 Login Procedure
Perform the following steps to login to the web user interface.
NOTE:
The default settings can be found in
3.1 Default Settings
.
STEP 1:
Start the Internet browser and
enter the default IP address for the device in the Web
address field. For example, if the default IP address is 192.168.1.1, type
http://192.168.1.1
.
NOTE:
For
local administration (i.e. LAN access), the PC running the browser must be attached
to the Ethernet, and not necessarily to the device.
For remote access (i.e. WAN), use the IP address shown on the
Chapter 4
Device
Information screen and login with remote username and password.
STEP 2:
A dialog box will appear, such as the one below. Enter the default
username and
password, as defined in section
3.1 Default Settings
.
Click
OK
to continue.
NOTE:
The login password can be changed later (see
8.6.1 Accounts
).
STEP 3:
After successfully logging in for the first time, you will reach this screen.
Summary of Contents for AR-5310u
Page 1: ...AR 5313u AR 5310u Wireless ADSL2 Router User Manual 261056 076 Version A1 1 May 6 2016...
Page 50: ...49 5 2 6 SIP ALG This page allows you to enable disable SIP ALG...
Page 58: ...57 5 3 3 UPnP Select the checkbox provided and click Apply Save to enable UPnP protocol...
Page 66: ...65 A maximum of 100 entries can be added to the URL Filter list...
