MNC-0000-041
13 of 34
Revision A
Operation Addendum, HPA Control Utility
Figure 12, Communications Menu
12.
Refer to Figure 13. The “IP Adrs” menu allows you to tell the HPA
Control program the IP address of the amplifier that you wish to
communicate with.
Figure 13, Set Ethernet IP Address
13.
The “Scan for Serial Ports” option (Figure 12) allows you to scan
the M&C PC for available RS232 communication ports.
14. Refer to Figure 14 on page 14. The “COM Port” option on the
Communications menu allows you to set the Baud Rate, number
of Data Bits, Parity and number of Stop bits used on the PC side
of the connection.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
