Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Revision 15
System Connectors, Installation, and Startup
2–10
MN-LPOD
2.3.4.4
PS 2 ‘J3 | POWER IN’ 48 VDC Power Main Option
The connector type and mating connector specification and the pin assignments specific to the
PS 2 48 VDC power interface option are as follows:
Unit Connector Type:
CEFD P/N CN-0000288 (ITT Cannon CA3102E20-15SB-F80A232)
Supplied Mating Connector:
CEFD P/N CN-0000289 (ITT Cannon CA3106E20-15SB-F80A232)
Table 2-7. PS 2 ‘J3 | POWER IN’ 48 VDC Pin Assignments
Pin
Description
A
V+
B
V+
C
NO CONNECT
D
NO CONNECT
E
V-
F
V-
G
GROUND (Note 2)
Notes:
1.
Use 12 AWG wire to each of the appropriate pins, according to the individual pin assignments.
2.
As an alternative, the ground connection can be made to the unit's external ground stud.
