Satellite Terminal System
Revision 2
Terminal Mode Commands
MN/KST2000L.IOM
Preset
Configuration
Clear
Command
Response
Status
Response
<add/CPGM_n'cr'
>add/CPGM_n'cr''lf']
<add/CPGM_'cr'
>add/CPGM_'cr'
1 – xxx'cr'
2 – xxx'cr'
3 – xxx'cr'lf']
Where n = 1, 2 or 3
Where xxx = Programmed or None
Lock Mode
Command
Response
Status
Response
<add/LM_xx'cr'
>add/LM_xx'cr''lf']
<add/LM_'cr'
>add/LM_xx''cr''lf']
Where xx = LK (lock) or DS (disable), default = DS
Lock mode prevents the present settings from being changed.
System
Configuration
Status
Status
Response
<add/OS_'cr'
>add/OS_'cr'
UCF_nnnnn.n'cr'
DCF_nnnnn.n'cr'
RF_xxx'cr'
UCA_nn.n'cr'
DCA_nn.n'cr'
SEL_n'cr''lf']
Returns block of data on addressed unit.
nnnnn.n = frequency
nnnnn.n = frequency
xxx = ON, WRM, OFF
nn.n = attenuation
nn.n = attenuation
n = 1, 2, 3, or NONE
AGC Command
Response
Status
Response
<add/UAGC_xxx'cr'
>add/UAGC_xxx'cr''lf']
<add/UAGC_'cr'
>add/UAGC_xxx'cr''lf']
Where xxx = ON, OFF
7.4 HPA
Commands
Commands and responses for controlling and determining the status of HPAs.
HPA
Power Enable
Command
Response
Status
Response
<add/HPE_xxx'cr'
>add/HPE_xxx'cr''lf']
<add/HPE_'cr'
>add/HPE_xxx'cr''lf']
Where xxx = ON/OFF, default is OFF
(For ADAP SSPAs only)
External
Fault Enable
Command
Response
Status
Response
<add/XFE_xxx'cr'
>add/XFE_xxx'cr''lf']
<add/XFE_'cr'
>add/XFE_xxx'cr''lf']
Where xxx= ON/OFF, default is ON
Determines if the system takes action on HPA fault
notification
7–5
