Comtec Encore 4, User Manual, Page: 17 / 36

O-11
UMAN-EN4
continued next page
Installation of Label Media
The Encore 4 can print and separate labels automati-
cally using its optional built in label peeler, and print on
conventional media or print continuous batches of labels
without using the peeler. The following details label
media installation for these two modes.
Peeler not in use
(Journal, linerless, or batch quantities of labels)
1. Turn unit off.
2. Press and hold the “Open” button on the front of the
unit. Rotate the top back to reveal the paper com-
partment
3. Remove the edge guide and install the media roll
on the spindle. Lead the free end over the rubber
roller (platen). Media should feed from the top of
the roll.
4. Slide the edge guide back over the spindle and
against the roll of media. Roll will be automatically
centered in the paper compartment.
5. Close the top and insure it is securely latched
before beginning to print.
Peeler in use
(Do not use the label peeler when printing a batch quantity of
labels)
1. Turn unit off.
2. Press and hold the “Open” button on the front of the
unit. Rotate the top back to reveal the paper com-
partment
3. Remove the edge guide and install the media roll
on the spindle. Lead the free end over the rubber
roller (platen). Media should feed from the top of
the roll..
4. Lift peeler roller by depressing “Open” button on
front of unit. Lead edge of media under the
grooved peeler roller. Stock will emerge from the
slot in the front cover.