Comtec Encore 4, User Manual, Page: 14 / 36

O-8
UMAN-EN4
Lift Release Latch to
remove battery pack.
Battery Contacts.
Encore 4 Battery Installation/Removal
Batteries and Charging
Removing and Replacing Batteries
Batteries are removed from the Encore 4 by the follow-
ing procedure:
1. Face the front of the printer. Push the battery
release button on the right side of the printer to-
wards the top of the printer.
2. Firmly slide the battery pack out the left side of the
printer until it is clear while still keeping the battery
release button raised.
Batteries are replaced by the following procedure:
1. Align the battery pack to the printer so that the
battery contacts (the metal plates on the top of the
battery) are oriented towards the top and inside of
the printer.
2. Slide the pack into the printer until it locks in place.
3. The battery will engage with a distinct “click” .