Comset CM685V-6, User Manual

Page: 63 / 88

CM685V-6 User Manual
63
www.comset.com.au

Bring up on boot : If checked, the LAN interface will be set to ‘up’ upon system boot-up. If
unchecked, the LAN interface will be ‘down’. Don’t uncheck it if not required.

Use built-in IPv6-management : The default is checked. If IPv6 is not needed, it can be
unchecked.

Override MAC address : Overrides LAN MAC address.

Override MTU : Maximum Transmission Unit.

Use gateway metric : The LAN subnet’s metric to gateway.

Bridge interfaces : LAN bridges wired-LAN and WiFi in the same LAN subnet.

Enable STP : Enable Spanning Tree Protocol on LAN. The default value is unchecked.