Comset CM685V-6, User Manual

Page: 51 / 88

CM685V-6 User Manual
51
www.comset.com.au
3.5.8.3 L2TP
This page shows a list of configured L2TP instances and their state. Click the button “Edit” to make
changes to an instance, or click the button “Delete” to delete it.

L2TP Client configuration

Enable : Enable this L2TP instance.

Server : Domain name or IP address of L2TP server.

Username : Server authentication username.

Password : Server authentication password.

MTU : Maximum Transmission Unit.

Keep Alive : Number of unanswered echo requests before considering the peer dead.
The interval between echo requests is 5 seconds.

Checkup Interval : Number of seconds to pass before checking if the interface is not
up since the last setup attempt and retry the connection otherwise. Set it to a value
sufficient for a successful L2TP connection for you. It's mainly for the case that netifd
sent the connect request yet xl2tpd failed to complete it without the notice of netifd.