Comset CM685V-6, User Manual

Page: 41 / 88

CM685V-6 User Manual
41
www.comset.com.au

Get Host/Lan : The network range to get the router via SNMP, default is ‘0.0.0.0./0’

Set Community : The username for SNMP set. The default value is ‘private’. SNMP set is
read-write.

Set Host/Lan : The network range to set the router via SNMP, default is ‘0.0.0.0./0’

User : SNMPv3 username

Security Mode : Three options: None, Private and Authorised. If it is set to ‘None’, there is no
password required. If it is set to ‘Authorised’, only Authentication method and password are
required.

Authentication : Authentication method with two options: MD5 and SHA.

Encryption : Encryption method DES and AES supported.

Authentication password : SNMPv3 authentication password is at least 8 characters long.

Encryption password : SNMPv3 encryption password is at least 8 characters long.
After all items are setup, click the button “Save & Apply” to enable SNMP functionality.