3
web site, www.comrex.com. Instructions on how to set devices for static IP are contained in the Help
menu of the software.
While no configuration of the CS itself is required, you must associate a STAC-VIP mainframe with a
control surface. This is done via the web configuration page on the STAC-VIP mainframe. See the STAC-
VIP manual (page 29) for information on how to access this page using a web browser.
Once the Configuration page is open, navigate to control surfaces and you will see an option to
associate up to four control surfaces with the mainframe. Any entries that already have an association
will be displayed in blue.
When you click an unused entry, the mainframe will scan your local LAN and display a list of all control
surfaces detected. These will be displayed by Ethernet MAC address. The MAC address of a control
surface can be found on a label at the bottom of the unit.
Choose a control surface here and it will become associated with that mainframe.
