Computime TIMEVISION PLUS FACESCAN, Manual

Page: 24 / 29

T
IME
V
ISION
P
LUS
F
ACE
S
CAN
M
ANUAL
P
AGE
23 | 28
Networking TimeVision Plus
Setting Up the Database
If you require assistance with this, please contact your IT.
 Create a network share on the server.
 Give the share full access rights for Everyone and Authenticated Users.
 Copy the contents of your database to the new share.
If you aren’t sure where your database is located:

Log into TimeVision Plus.
 Click on ‘Setup’ .

Click on ‘System Info’ .
 Look for the ‘Data Path’ line – this will tell you where your database is located.
Connecting TimeVision Plus to the Networked Database
 Press the Windows key on your keyboard and the letter ‘R’ at the same time.

The ‘Run’ box should appear on your screen.
 Type regedit into the box and click ‘OK’ .
 This should open the Registry Editor. Find the following entry:
HKEY_LOCAL_MACHINE → SOFTWARE → Wow6432Node → Smart Office → TimeVision
Plus → DataPath
 Edit this key to reflect where the database is now held. (e.g. T:\Data )
 Close the registry editor and ensure the changes have been saved.
 Open the Windows Control Panel.
 Click on BDE Administrator.
 Select Configuration → Drivers → Native → Paradox.
 Edit NETDIR so it’s identical to the DataPath in the registry.
 Save changes and exit.
Note : The number of concurrent licenses will restrict the number of people who can log in. This
procedure can be done on an unlimited number of PCs, but the number of people who can log in
at any one time will be restricted.