6
3. TUNING THE SOCKET AND THE
THERMOSTAT(S) TOGETHER
ATTENTION!
If you wish to use the
COMPUTHERM
Q1RX
socket
in addition to the receiver unit of the thermostat, then the socket,
the receiver of the thermostat and the thermostat should be tuned
together at the same time, so that they can operate simultaneously.
ATTENTION!
The socket can be paired with up to 12 separate
COMPUTHERM
wireless thermostats at the same time. If you do not
want a particular thermostat to control the socket, pair the thermostat
with another
COMPUTHERM
wireless device or reset the socket.
Press the “
ON/OFF
” button of the socket (for approximately 10
seconds) until the green LED light starts flashing. If you also wish to
use the receiver unit of the
Q3RF, Q5RF, Q7RF
or
Q8RF
thermostat,
