7
then start the tuning process on that receiver unit too, as described in
its manual, so that its green LED light (or red LED light in case of the
receiver of the
Q5RF
or
Q8RF
thermostat) starts flashing. After this,
tune the devices together according to the manual of the thermostat.
If the LED lights stop flashing, then the devices are tuned together.
If you want to pair more than 1 thermostat with the socket, then
repeat the previous steps with the other thermostats too. If you have
reached the maximum (12) synchronizable product limit, then the
red and green LEDs on the product will flash alternately 3 times after
pressing the „
ON/OFF
” button for 10 seconds. In this case, to pair a
new thermostat, the socket must be reset by pressing the „
ON/OFF
”
and „
Manua
l” buttons together for 10 seconds. Both LEDs will then
light up for 2 seconds to indicate that the socket has been reset and
synchronization of the new thermostats can begin.
