manualshive.com logo in svg

CompUSA 333628, User Manual

Share
Download
CompUSA 333628 User Manual Download Page 49

 

48

 

 

Add PC 

Parameters 

   Description 

Client PC Description

 

The description for this client PC rule. 

 

Client PC IP Addresses

 

Enter the IP address range that you wish to apply this Access Control rule to. 
This is the user’s IP address(es) that you wish to setup an Access Control 
rule for. 

 

 

 

 

 

Note:

 You need to give your LAN PC clients a fixed/static IP address for the 

Access Control rule to work properly. 

 

Client PC Service

 

You can block the clients from accessing some Internet services by checking 
the services you want to block. 

 

Protocol

 

This allows you to select UDP, TCP, or both protocol types you want to block. 

 

Port Range

 

It can be assign up to five port ranges. The router will block clients from 
accessing Internet services that use these ports. 

 

Apply Changes

 

Click “Apply Changes” to save the setting. 

 

Reset

 

Click “Reset” to clear all fields. 

 
Click <

Apply Changes>

 at the bottom of the screen to save the above configurations.  

 
 
 

Summary of Contents for 333628







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands