manualshive.com logo in svg

CompUSA 333628, User Manual

Share
Download
CompUSA 333628 User Manual Download Page 40

 

39

Private Port

 

This is the port number (of the above Private IP host) that the below Public Port 
number will be changed to when the packet enters your LAN (to the LAN 
Server/Client IP) 

 

Type

 

Select the port number protocol type (TCP, UDP or both). If you are unsure, leave it 
as the default “both” protocol. 

 

Public Port

 

Enter the service (service/Internet application) port number from the Internet that will 
be re-directed to the above Private IP address host in your LAN  

Note

: Virtual Server function will have priority over the DMZ function if there is a 

conflict between the Virtual Server and the DMZ settings. 

 

Comment

 

The description of this setting.  

 

Add Virtual Server

 

Fill in the "Private IP", "Private Port", "Type", “Public Port”, and "Comment" of the 
setting to be added and then click "Add". Then this Virtual Server setting will be 
added into the "Current Virtual Server Table" below. If you find any typo before 
adding it and want to retype again, just click "Clear" and the fields will be cleared. 

 

Remove Virtual Server

 

If you want to remove some Virtual Server settings from the "Current Virtual Server 
Table", select the Virtual Server settings you want to remove in the table and then 
click "Delete Selected". If you want to remove all Virtual Server settings from the table, 
just click the "Delete All" button. Click "Reset" to clear your current selections. 

 
Click <

Apply>

 at the bottom of the screen to save the above configurations.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 333628







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands