manualshive.com logo in svg

CompUSA 333628, User Manual

Share
Download
CompUSA 333628 User Manual Download Page 39

 

38

Comment

 

The description of this setting. 

 

Add Port Forwarding into the table

 

Fill in the "Private IP", “Type”, “Port Range”, and "Comment" of the 
setting to be added and then click "Add". Then this Port Forwarding 
setting will be added into the "Current Port Forwarding Table" below. 
If you find any typo before adding it and want to retype it again, click 
"Clear" and the fields will be cleared. 

 

Remove Port Forwarding into the table

 

If you want to remove some Port Forwarding settings from the 
"Current Port Forwarding Table", select the Port Forwarding settings 
you want to removeand then click "Delete Selected". If you want to 
remove all Port Forwarding settings from the table, just click the 
"Delete All" button. Click "Reset" to clear your current selections.  

 
Click <

Apply>

 at the bottom of the screen to save the above configurations.  

 
 

2.6.2 Virtual Server  

 
Use the Virtual Server function when you want different servers/clients in your LAN to handle different service/Internet 
application type (e.g. Email, FTP, Web server etc.) from the Internet. Computers use numbers called port numbers to 
recognize a particular service/Internet application type. The Virtual Server allows you to re-direct a particular service 
port number (from the Internet/WAN Port) to a particular LAN private IP address and its service port number. (See 
Glossary for an explanation on Port number) 
 

 

 
 

Parameters 

  Description 

 

Enable Virtual Server

 

Enable Virtual Server. 

 

Private IP

 

This is the LAN client/host IP address that the Public Port number packet will be sent 
to.  

 

Note:

 You need to give your LAN PC clients a fixed/static IP address for Virtual 

Server to work properly. 

 

Summary of Contents for 333628







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands