manualshive.com logo in svg

CompUSA 333628, User Manual

Share
Download
CompUSA 333628 User Manual Download Page 42

 

41

2.6.3 Special Applications 

 

Some applications require multiple connections, such as Internet games, video conferencing, Internet telephony, and 
others. In this section you can configure the router to support multiple connections for these types of applications. 
 

 

 

 
Parameters 

  Description 

 

Enable Trigger Port

 

Enables the Special Application function. 

 

Trigger Port

 

This is the outgoing (Outbound) range of port numbers for this particular application 

 

 

Trigger Type

 

Select whether the outbound port protocol is “TCP”, “UDP”, or both. 

 
Public Port

 

Enter the Incoming (Inbound) port or port range for this type of application (e.g. 2300-
2400, 47624) 

 
 

Note

: Individual port numbers are separated by a comma  

(e.g. 47624, 5775, 6541 etc.). To input a port range use a “dash” to separate the two 
port number range (e.g. 2300-2400) 

 
Public Type

 

 

 

Select the Inbound port protocol type: “TCP”, “UDP”, or both 

 
Comment

 

The description of this setting.  

 

Popular Applications

 

This section lists the more popular applications that require multiple connections. 
Select an application from the Popular Applications selection. Once you have 
selected an application, select a location (1-10) in the 

Copy to 

selection box and then 

click the 

Copy to

 button. This will automatically list the Public Ports required for this 

popular application in the location (1-10) you have specified. 

 

Add Special Application

 

Fill in the "Trigger Port", "Trigger Type”, “Public Port”, "Public Type", "Public Port", 
and "Comment" of the setting to be added and then click "Add". Then this Special 
Application setting will be added into the "Current Trigger-Port Table" below. If you 
find any typo before adding it and want to retype it again, click "Clear" and the fields 
will be cleared. 

Summary of Contents for 333628







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands