CSW-HD440NEXT Page 2 of 19
1. Introduction
The Comprehensive CSW-HD440NEXT with simultaneous CAT5e/6/7 and
HDMI outputs connects four HDMI sources to eight displays. This matrix
features four HDMI outputs and each HDMI output is mirrored to provide a
CAT-Cable output which runs simultaneously.
It supports the transmission of
video (resolutions up to 1080p Full HD) and supports high resolution digital
audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio
. Connect an IR Receiver to each of the CAT-Cable
outputs to extend the HDMI signal up to 164ft for multi-room connectivity.
It
works with Blu-Ray players, Set-Top boxes, Home Theater PCs, and game
consoles that connect to an HDMI display. Any source is accessible at all times
by any display by selecting it
via the supplied IR Remote Control, RS-232,
TCP/IP or by using the selection buttons on the front panel. This device supports
High Definition Audio, and 3D signal compatibility.
2. Features
• HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
• Supports HDMI 3D pass-through
• Supports resolutions from VGA~WUXGA and HD resolutions from
480i~1080p dependent upon the EDID settings
• Supports transmission distances up to 164ft
through CAT5e/6/7 cable
• Supports simultaneous HDMI and CAT outputs
• Supports wideband IR(30-60Khz) matrix system, IR transport channel can be
forward or backward
• Supports RS-232, remote control, on-panel control and TCP/IP Control
• Supports smart EDID management
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
