CSW-HD440NEXT Page 7 of 19
Part 1:
PC CONTROL
TCP/IP:
This port is the link for TCP/IP controls, connect to an active Ethernet
link with an RJ45 terminated cable.
RS232:
Connect to a PC or control system with D-Sub 9-pin cable for the
transmission of RS-232 commands.
Part2:
IR Channel
IR EXT:
if the panel sensor is obstructed or the unit is installed in a closed area
out of infrared line of sight ,the IR RX receiver included can be inserted into the
IR EXT port at the rear to extend the IR sensor range and enable local control of
the matrix.
IR IN/OUT:
Super IR control system interface. for further details, please refer
to the Super IR system control introduction.
Part3:
HDMI INPUT
Connect to the HDMI input source devices such as a DVD player or a Set-top
Box with HDMI cable.
Part4: HDMI and CAT OUTPUT
