CSW-HD440NEXT Page 12 of 19
1.
HDMI OUT:
This slot is where you connect the HDTV or monitor with HDMI
cable for input source display.
2.
POWER LED:
This blue LED illuminate when the device is connected with
power supply.
3.
LOCK LED:
This blue LED illuminate when the signal locked.
4.
Coaxial OUT:
This slot is where you connect to the amplifier with coaxial
cable.
5.
ARC SW:
Switch this sw to open or close the ARC fuction.
6.
DC 5V:
Plug the 5V DC power supply into the unit and connect the adaptor
to AC wall outlet.
7.
IR RX:
This 3.5mm phone for super IR control system IR receiver .
8.
IR TX:
This 3.5mm phone for super IR control system IR Emitter.
9.
CAT5E/6:
This CAT5E/6 port connect to HDMI Matrix CAT OUTPUT with
CAT5e/6/7 cable.
9. PC controller user guide
Installation
Matrix controller is a green software. Just copy MatrixController.exe to PC which
is used to control the Matrix by RS232 COM port or TCP/IP to complete
installation.
Preparation
Connect PC and Matrix by RS232 cable (headers of both sides of cable
should be FEMALE) or TCP/IP(local area network)
Power-up Matrix
Double click MatirxController.exe icon to run it
