34 |
P a g e
Edge 540/2.6m
This is an option that can only be done if you have elected to glue in place the battery/ignition tray as
previously described earlier in the manual. If you are not using this tray cutting access is not an option!
Having the tray glued in place significantly increases the rigidity of the engine dome. Cutting the access
holes and canister holes can compromise the strength of the engine dome. You can have either access
holes or canister holes, not both, unless you glue the battery/ignition tray in place.
To aid in access to behind the engine dome, you can cut some access holes into the top of the dome. Please do
not cut the seam line or the reinforcing join fibreglass band. Stay around 25mm either side of the seam line. The
size of the access holes hole should be no greater than 80mm.
We hope you have enjoyed assembling your Composite Arf Edge 540 and you have many years of happy
flying with it. We have strived to cover as many area’s as possible to ensure the assembly process flowed
as smoothly as possible. If you have found yourself in difficulty and need some assistance, your sales rep is
only an email away. Please contact your rep and they will endeavour to assist you, and get you back on
track. Alternatively you can contact us via the emails below. We also welcome your feedback, please
contact us if you would like to see something added or altered. We are always looking to improve our
products and the information we supply.
Technical support;
Feedback;
www.carf-models.com
Edge 540-2.6m manual V1 (April 2011)
Easy Access (Conditional option)