9
Setup Procedure: Hipot Tester
This procedure will describe the connection of the HTT-1S to a hipot
tester or a combination hipot/ground bond tester. Because of the varying types of
tester outputs, cables provided with the HTT-1S may not fit the hipot / ground
bond tester. For custom cables, please contact Compliance West USA.
1)
Connect the hipot tester to the HTT-1S.
i)
On your hipot tester, identify the high voltage output receptacle. Connect
the Output to the high voltage receptacle.
ii)
On your hipot tester, identify the return lead of the high voltage output.
This is connected to the black banana Return jack receptacle of the HTT-1S.
Figure 4: Connection to a hipot tester
Summary of Contents for HTT-1S
