Compliance West HT-2000P, Instruction Manual

Page: 12 / 30

10
ELECTRICAL
Output 0-2000 Volts AC
Pigtail and Receptacle adapters available for most
configurations. Consult factory.
Leakage Current 1-20 mA
Pass/Fail Criteria:
Ground Continuity: 3 ohm ± 5% * (defeatable)
Leakage Current: User adjustable 1-20 mA
Dielectric Breakdown: Separate high frequency detection circuit for
breakdown spike detection
Test Time: User adjustable 1-60 sec.
Voltage Ramp Time: User adjustable 1-5 sec.
Pass/Fail Repeatability
±
3%
Meter accuracy + 2% from 500-2000 volts AC
Duty cycle 100 %
Discharge Time Voltage dependent; discharge progress displayed on
front panel meter
Test adjustments Tamperproof operation available
ENVIRONMENTAL
Operating Temperature 15-40
°
C
Relative Humidity Range 0-90% non-condensing
GENERAL
Input power requirements Model HT-2000P: 117-127 volts, 50/60 Hz
Weight 10½ lbs
SAFETY AGENCY TOPICS
Transformer Output < 500VA
Visual Indication of Voltage Output
Provided by front panel meter, directly
connected to high voltage output
Failure Indication Audible, provided by internal buzzer
Visual, provided by red LED's on front panel
Test automatically terminated on failure
Ground Test Provided; 3 ohm pass/fail point*. May be defeated
for testing of products with two wire power supply
cords.
Leakage Test Provided; 5 mA factory set pass/fail point, user
adjustable.
Operation Instructions Provided on rear panel.
Table 1. HT-2000P Specifications
*Ground Continuity Pass/Fail Level can be adjusted from .5 to 5 ohms during the calibration procedure.