Chapter 13
Configuration on Various WAN Type
63
13.2
Configuring Dynamic IP Connection
The Compex WP11B+ is pre-configured with WAN connection using Dynamic IP.
Hence, if you are using Cable Internet access, you do not need to configure the WAN
connection.
However, if your account requires a
DHCP Client ID
in order to release an IP address,
you may need to configure the name of Compex WP11B+ with that of the DHCP Client
ID issued by your ISP.
See the section on “
System Identity”
, and remember to enter the DHCP Client ID
issued by the ISP into the
System Name
field in the System Identity.
NOTE
If your computer is not able to resolve any web site, please verify that your
DNS entry of the computer has been defined correctly.
13.2.1
How to configure Singapore Cable Vision (SCV) Service
SCV provides a Dynamic IP address connection service. Assuming that your
WP11B+ is not in the Dynamic IP setting, please follow the procedures to
change to the appropriate WAN type.
1.
Go to
WAN Setup
. Click on the “Change” button for list of other WAN
types Selection.
2.
On the list of other WAN types selection, check the radio button next to
the
Dynamic IP Address
and click on the “Save” button.
Figure 13.2a
Dynamic IP Address – for SCV broadband provider
