Chapter 10 Setting up of WAN using Wireless Routing Client
44
Chapter 10
Setting up of WAN using Wireless Routing Client
Setting Compex WP11B+ as a wireless routing client enables you to access to the internet
through wireless method. The PCMCIA LAN card will act as a WAN port. It will communicate
with an Access Point and then from there, we can access to Internet through the ADSL/Cable
modem which is connected to the Access Point. In this way, the Ethernet port of Compex
WP11B+ can be used to connect to other networking devices, such as switches to cater for more
PCs.
10.1
Setting up Compex WP11B+ as Wireless Routing Client
1.
Connect a crossover cable from the Ethernet port of the Compex WP11B+ to your
workstation.
Figure 10.1a
Connect Compex WP11B+ to PC
2.
Power on both your workstation and the Compex WP11B+. The WLAN LED
should light up, indicating the connection has been established.
3.
You may start to configure the Compex WP11B+ before connecting to the Internet.
Please refer to
“Configuring Compex WP11B+ as Wireless Routing Client
through Web Interface”
.
WP11B+
Workstation
