Chapter 9
Setting up of Wide Area Network using Gateway
Mode
42
5.
For details in configuring Pseudo VLAN and WEP encryption method, please refer
to the
Section 7.1 “Adding a client from the Pseudo Group
”, Step 4.
6.
If you want to configure WAN setup, proceed to
WAN Setup
and the following
GUI will appear. By default, Compex WP11B+ is pre-configured with Dynamic IP,
which is suitable for most Cable Internet service providers.
Figure 9.3d
WAN setup
Alternatively, you may also choose the different WAN type by clicking on the
“Change” button. For more details, please refer to the next chapter.
