Chapter 7
Setting up of Wireless Per Group Pseudo LAN using
AP Bridge Mode
25
2.
Click “Apply” button from the
Network Mode Setup
GUI and the web page for
Access Point Setup as shown in Figure 7.1b will appear.
Figure 7.1b
Selection of Network Mode
3.
Enter the
Access Point Setup
parameters for your network. An example is shown in
Figure 7.1c with these parameters entered.
Example:
Country:
United States-US
Access Point Name
: WP11B+
ESSID
: Any
Channel
: 3
TX Rate
: Fully Auto
RTS Threshold
: 2432
Frag Threshold
: 2346
Access Control
: Disable
WEP encryption method
: Disable
