Chapter 10 Setting up of WAN using Wireless Routing Client
46
10.2
Configuring Compex WP11B+ as Wireless Routing Client through Web
Interface
Assuming that Compex WP11B+ is in the default setting.
1.
Activate the
uConfig
program, click on the “OpenWeb” button.
2.
Go to the
CONFIGURATION
menu and click on
Network Mode Selection
.
Select
Wireless Routing Client
mode and click on the “Apply” button. Next, click
on the “Yes” button to reboot the device.
Figure 10.2a
Selection of Network Mode – Wireless Routing Client
NOTE
Do not hit the “Logon” button. This will not lead you to the authentication
page!!
3.
Go to
uConfig
program and click on the “OpenWeb” button. Logon again and now
Compex WP11B+ is in
Wireless Routing Client
Mode.
