Compaq WL110, User Manual

Page: 30 / 144

4-4 Basic Network Configuration
You must change this factory-set IP address (153.69.254.254) upon first
configuration.
To connect to the Access Point proceed as follows:
1. Start the AP Manager program.
2. Select the Access Point that you wish to configure from the list or enter the
IP address in the field
Enter the IP address for a specific Access Point
(see
Figure 4-3).
❏
A new Access Point is marked with a special icon.
❏
This list will display all Access Points located on the same IP subnet as
your management station (see also “Modifying the Configuration” on
page 8-18).
❏
To gain access to Access Points on a different subnet or via a dial-up
connection, enter a specific IP address in the field
Enter the IP address for a
specific Access Point
.
Figure 4-3 Main AP Manager window
3. Click the
Edit
button.
❏
If the Access Point that you select is identified by the factory-set IP
address 153.69.254.254, you will be prompted to change this IP address.
a. Enter a unique IP address for the Access Point in the field Access
Point
IP Address
.
b. Record the IP address on the “Access Point Configuration Record”
located in appendix A “Start-up Configuration”.