Compaq StorageWorks HSZ70, Installation Manual, Page: 96 / 168

8-10 HSZ70 Solutions Software V7.7 for Novell NetWare - PCI
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: HSZ70 Solutions Software V7.7 for Novell NetWare - PCI Comments:
Part Number: AA-R8JUE-TE File Name: i-ch8 Installing Upgrades to Your RA7000 Subsystem.doc Last Saved On: 5/22/00 2:23 PM
4. Shutdown the existing controller by typing:
HSZ70 > SHUTDOWN THIS_CONTROLLER
When you enter the
SHUTDOWN
command, do not specify any optional
qualifiers. The default qualifiers do not allow the controller to shut down until
data is completely and successfully stored on the appropriate storage devices.
5. To determine when the controller has shut down, observe the front panel
of the controller. When the controller’s reset button and first three LEDs
are on continuously, the controller has shutdown.
6. Turn off the power to the subsystem by using the ON/OFF on the AC
Power Controller module(s) in the bottom of the enclosure (see Figure
8-6). If your enclosure contains two AC Power Controllers (one in both
lower corners), you must turn off power on both Power Controllers.
Figure 8-6. Power controller