Compaq StorageWorks HSZ70, Installation Manual, Page: 90 / 168

8-4 HSZ70 Solutions Software V7.7 for Novell NetWare - PCI
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: HSZ70 Solutions Software V7.7 for Novell NetWare - PCI Comments:
Part Number: AA-R8JUE-TE File Name: i-ch8 Installing Upgrades to Your RA7000 Subsystem.doc Last Saved On: 5/22/00 2:23 PM
Installing First Controller and Cache Module
Install any additional cache memory you purchased for your cache module
prior to installing the second controller and cache module. See the section
Installing Additional Cache Memory, in this Appendix, to install cache
memory.
To install the first controller:
1. Obtain and place an ESD wrist strap around your wrist. Ensure that the
strap fits snugly around your wrist.
2. Attach or clip the other end of the ESD wrist strap to the cabinet
grounding stud or a convenient cabinet grounding point (non-painted
surface).
3. If this is the first controller, slide it, without inserting the program card,
into the top controller slot in the storage enclosure, as shown in Table
8-2. Press the handles to firmly seat the controller in the slot.
Figure 8-2. Installing first controller Into the top controller slot