Compaq StorageWorks HSZ70, Installation Manual, Page: 60 / 168

6-4 HSZ70 Solutions Software V7.7 for Novell NetWare - PCI
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: HSZ70 Solutions Software V7.7 for Novell NetWare - PCI Comments:
Part Number: AA-R8JUE-TE File Name: g-ch6 Creating Your Storage Configuration with the CLI.doc Last Saved On: 5/17/00 9:16 AM
Connecting the Cable
To connect a maintenance terminal or PC to a HSZ70 controller:
1. Locate the connecting cable that came with the RA7000 Subsystem. It
has an RJ12 connector (similar to standard telephone plug) on one end
and a 9-pin serial connector on the other end.
2. Plug the serial connector into the 9-pin serial port/com port 1 of the PC.
If a 9-pin serial port is not available on a PC, use the 9-pin to 25-pin
adapter (P/N: 12-45238-01) supplied with your subsystem.
3. Plug the RJ12 connector from the PC or maintenance terminal into the
maintenance port on the HSZ70 controller (see Figure 6-1).
4. Note which serial port you use; you will need that information if using a
communications program.
Figure 6-1. Making a serial connection to the HSZ70 controller