Compaq StorageWorks HSZ70, Installation Manual, Page: 35 / 168

Compaq Confidential – Need to Know Required
Writer: Robert Young Project: HSZ70 Solutions Software V7.7 for Novell NetWare - PCI Comments:
Part Number: AA-R8JUD-TE File Name: d-ch3 Preparing Your Novell NetWare Host for Use with the HSZ70.doc Last Saved On: 5/17/00 9:16 AM
Chapter
3
Preparing Your Novell NetWare Host for
Use with the HSZ70
This chapter contains instructions for configuring your host adapter and
installing the SWXA3–BD/Ultra PCI Miniport Device Driver in your host
system.
Configuring Your Host Adapter
1. Boot your computer, and when you see the prompt to access the 2944
BIOS setup, press Ctrl+A. Watch closely, the prompt appears quickly at
the bottom of the screen during the boot routine.
2. Select
Configuration/View Host Adapter Settings
and
press Enter.
3. Press F6 to set the adapter to its default settings.
4. Select
SCSI Device Configuration
and press Enter.
5. Choose
Yes
for
Send Start Unit Command
for all Target IDs.
6. Verify that
Initiate Wide Negotiation
settings are set to
Yes
.
7. Press Esc to return to the Configuration Menu Screen.
8. Select
ADVANCED CONFIRMATION OPTIONS
and press Enter.
9. Set
Support for Ultra SCSI Speed
to
Enabled
.
10. Save the configuration and exit the BIOS setup.