Compaq Prolinea 4100, Maintenance & Serice Manual

Page: 113 / 197

9. Ensure that both hard drives have their configuration set for
cable-select installation (see Chapter 6) and install the mounting
bracket onto the hard drive (Figure 5-33).
10. Reverse the above procedure to complete the installation of the hard
drive into an accessible drive bay.
Drive Bay Bezel
To remove a drive bay bezel, complete the following steps:
1. Complete the steps in Section 5.3 to prepare the computer for
disassembly.
2. Complete the steps in Unit Cover Removal and Replacement in Section 5.4
to gain access to the drive bay bezel.
3. The bezel is held in place with two screws (Figure 5-34). Remove the
screws to release the bezel.