manualshive.com logo in svg

Compaq Proliant 800, Setup And Installation Manual

Share
Download
Compaq Proliant 800 Setup And Installation Manual Download Page 19

1-6    Features

Writer: Rick Chew   Project: Compaq ProLiant 800 Servers Supporting Pentium II Processors and 100-MHz System

Bus Setup and Installation Guide   Comments: 179489-001

File Name: b-ch01.doc   Last Saved On: 4/1/98 8:00 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Server Configuration and
Management

Compaq servers offer an extensive set of features and optional tools to support
effective server management and configuration:

■

 

Compaq SmartStart

■

 

Server Management

■

 

Compaq Insight Manager

■

 

Compaq System Configuration Utility

■

 

Compaq Integrated Remote Console

■

 

Compaq Integrated Management Log

Compaq SmartStart

SmartStart, located on the SmartStart and Support Software CD, is the
intelligent way to configure your Compaq server with Novell, Microsoft,
SCO, and IBM system software. SmartStart uses a step-by-step process to
configure the server and to load the system software, thereby achieving a
well-integrated server to ensure maximum dependability and supportability.
The SmartStart and Support Software CD also holds the Compaq System
Configuration Utility and ROMPaq. For information concerning SmartStart,
refer to the Server Setup and Management pack included in the shipping box.

Summary of Contents for Proliant 800

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands