3-12
Removal and Replacement Procedures
6.
While pressing the drivelock, pull the drive out of the drive bay.
Figure 3-13. Removing a 3.5-inch drive from a 5.25-inch drive bay
7.
Remove the bracket brace
1 from the top of the drive adapter by squeezing in on both
sides, then rotate the brace up and out
2.
8.
Remove the drive bezel
3.
9.
Remove the screws that secure the drive to the drive adapter
4.
10.
Remove the drive from the drive adapter
5.
1
1
2
4
3
5
4
Figure 3-14. Removing a 3.5-inch drive from the 5.25-inch drive adapter
To replace the drive, reverse the above procedure.
IMPORTANT: The primary 3.5-inch diskette drive should only be installed into bay 3.
