3-9
Compaq Professional Workstation AP200 Maintenance and Service Guide
3.5-Inch Hard Drive
To remove a 3.5-inch hard drive:
CAUTION: Before removing the access panel, ensure that the workstation is
turned off, all cables are disconnected from the back of the workstation, and the
power cord is disconnected from the grounded AC outlet.
1.
Perform the service preparations shown on page 3-2.
2.
Remove the access panel.
3.
Remove the front bezel.
4.
Disconnect the power
1 and data 2 cables from the back of the hard drive.
2
1
Figure 3-9. Disconnecting the hard drive cables
