United States
Compaq Presario Internet PC 5000 Series Computers
REMOVAL AND REPLACEMENT PROCEDURES
REMOVAL AND REPLACEMENT PROCEDURES
EXPANSION CARD
(Modem or Network
Card)
(Lower Front Panel -
Open the CD Storage
Door)
Removing the Expansion Card
Removal
Perform the preparation procedures
Turn the computer on its side (open side facing up)
and locate the expansion card(s).
2.
Remove the screw securing the expansion card.
3.
Pull the expansion card using a gentle rocking motion
from the connector on the system board.
4.
Replacement
Important:
The expansion card rear connector
must be properly inserted into the rear chassis
slot to ensure the card is properly seated into
the connector on the system board.
Align the card with connector on the system board
and rear connector slots on the chassis.
1.
Replace the screw to secure the expansion card to the
chassis.
2.
Summary of Contents for Presario 5000 Series
