Compaq Presario 5000 Series Maintenance And Service Manual Download

Page: 196 / 216

Return to top

Disk Drive

Problem

Probable Cause(s)

Possible Solution

Disk drive light stays on.

Disk may be damaged.
Disk may be installed

incorrectly
Software program may be

damaged.

Disk drive cannot write to a

disk.

Disk is not formatted.
Disk is write-protected.
Writing to the wrong drive.
Not enough space is left on the

disk.

Disk drive cannot read a

disk.

Disk is not formatted.
Using the wrong disk type for

the drive type.
Reading the wrong drive.
Disk drive has been disabled

by Computer Setup.

Return to top

Summary of Contents for Presario 5000 Series

























































































































































































































Search results

Summary of Contents for Presario 5000 Series

Reviews:

Related manuals for Presario 5000 Series

Brands by name

Popular brands

Compaq Presario 5000 Series, Maintenance And Service Manual

Search results

Summary of Contents for Presario 5000 Series

Reviews:

Related manuals for Presario 5000 Series

Brands by name

Popular brands