manualshive.com logo in svg

Compaq Presario 5000 Series, Maintenance And Service Manual

Share
Download
Compaq Presario 5000 Series Maintenance And Service Manual Download Page 54

United States    

Compaq Presario Internet PC 5000 Series Computers

REMOVAL AND REPLACEMENT PROCEDURES

PRODUCT DESCRIPTION

TROUBLESHOOTING

ILLUSTRATED PARTS CATALOG

REMOVAL AND REPLACEMENT PROCEDURES

JUMPER AND SWITCH INFORMATION

SPECIFICATIONS

ELECTROSTATIC

DISCHARGE

SERVICE

CONSIDERATIONS

PREPARATION FOR

DISASSEMBLY

SERIAL NUMBER

SIDE ACCESS PANEL

GRAPHICS CARD

EXPANSION CARD

(Modem or Network

Card)

1394 CARD

MEMORY MODULE

HARD DRIVE

DISK DRIVE

REMOVING THE TOP

DOOR

REMOVING THE CD

STORAGE DOOR

(Lower Front Panel -

Open the CD Storage

Door)

Preparation for Disassembly

To prepare the computer for removal and replacement procedures, complete the following steps:

Remove any disk, compact disc, or tape from the computer.

1.  

Turn off the computer and any peripheral devices that are connected to the computer.

2.  

CAUTION

The computer power switch should be turned off before you disconnect any cables.

 

CAUTION

Before doing any work inside your computer, ground yourself by touching a metal

part of the chassis.

Disconnect the power cord from the electrical outlet, and then from the computer.

3.  

Disconnect all peripheral device cables from the computer.

4.  

Turn the computer over on its side (open side facing up).

5.  

IMPORTANT

During disassembly, label each cable as you remove it. Be sure to note its

position and routing.

Summary of Contents for Presario 5000 Series

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands