manualshive.com logo in svg

Compaq Presario 3200 Series, Reference Manual

Share
Download
Compaq Presario 3200 Series Reference Manual Download Page 198

I-12   

POST Error Messages

Writer: Rickard   Project: Compaq Smart Array 3200 Controller Reference Guide    Comments: 340862-002

File Name: P-APPI.DOC   Last Saved On: 12/7/98 9:35 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

POST Error Messages

 

continued

Code

Meaning

Recommended Action

1796

Slot x Drive Array - Array Accelerator is not

responding. Array Accelerator is temporarily

disabled.

The Array Accelerator is not responding.

Replace the Array Accelerator or the

Smart Array controller.

1797

Slot x Drive Array - Array Accelerator Read

Error Occurred. Data in Array Accelerator has

been lost. Array Accelerator is disabled.

Replace the Array Accelerator or the

Smart Array controller. Restore data from

backup.

1798

Slot x Drive Array - Array Accelerator Write

Error Occurred. Array Accelerator is disabled.

Replace the Array Accelerator or the

Smart Array controller.

1799

Slot x Drive Array - Drive(s) Disabled due to

Array Accelerator Data Loss.

Select 

F1

 to continue with logical drives

disabled.

Select 

F2

 to accept data loss and to re-enable

logical drives.

Data stored in the Array Accelerator has been

lost; therefore the drives have been temporarily

disabled. Press 

F2

 to acknowledge the data loss

and re-enable the logical drives. Restore data

from backup.

Summary of Contents for Presario 3200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands