B-2
Electrostatic Discharge
Writer: Rebecca Wiggins Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: I-APPB.DOC Last Saved On: 12/7/98 1:35 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Grounding Methods
There are several methods for grounding. Use one or more of the following
measures when handling or installing electrostatic-sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded workstation
or the computer chassis. Wrist straps are flexible straps with a minimum
of 1 mega–ohm +/- 10 percent resistance in the ground cords.
■
Use heel straps, toe straps, or bootstraps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding static-dissipating work
mat.
If you do not have any of the suggested equipment for proper grounding, have
an Authorized Compaq Service Provider install the part.
NOTE
: For additional information on static electricity, or assistance with the
installation of this product, contact your Authorized Compaq Service Provider or
refer to the Maintenance and Service Guide.
