manualshive.com logo in svg

Compaq Presario 3200 Series, Reference Manual

Share
Download
Compaq Presario 3200 Series Reference Manual Download Page 141

D-5

Compaq Smart Array 3200 Controller Reference Guide

Writer: Rickard   Project: Compaq Smart Array 3200 Controller Reference Guide   Comments: 340862-002

File Name: K-APPD.DOC   Last Saved On: 12/7/98 1:37 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

SCSI Cable Connectors

To help identify the SCSI cables required for a Smart Array 3200 Controller
installation in the various configurations of Compaq servers, refer to Figure D-2.
Keep in mind these characteristics of SCSI cables:

■ 

External SCSI cables have a round wire with securable connectors.

■ 

Internal SCSI cables have a flat ribbon wire with push-on connectors.

■ 

Compaq SCSI cables are keyed so that they cannot be installed
incorrectly.

■ 

Fast-Wide SCSI-2 and Wide-Ultra SCSI (Wide SCSI) internal ribbon
cables are physically narrower than Fast-SCSI-2 (standard SCSI) cables.

External Wide SCSI 68-Pin

Internal Wide SCSI 68-Pin

External Standard SCSI 50-Pin

External VHDCI 

Figure D-2.    Identifying SCSI cable connectors

Summary of Contents for Presario 3200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands