manualshive.com logo in svg

Compaq Deskpro 386 - Desktop PC, Maintenance And Service Manual

Share
Download
Compaq Deskpro 386 - Desktop PC Maintenance And Service Manual Download Page 114

5-22 

Chapter 5, Error Messages and Codes 

Addendum 108431-001 (11-88) to 
Manual No. 108033-003

Table 5-2. Advanced Diagnostics Error Codes 

Continued

Error  

Code

 

Description

Recommended  

Action

Fixed Disk Drive Test

1700-xx

Fixed disk ID drive types test failed.

The following steps apply to error codes 1700-xx  

through 1799-xx: 
1. Run SETUP. 

2. Check the switch settings and jumper positions on the 

controller board and retest (see 

Chapter 8

). 

3. Replace the fixed disk drive signal and power cables  

and retest. 

4. Replace the controller board and retest. 

5. Replace the fixed disk drive and retest. 

6. Replace the system board and retest. 

1701-xx

Fixed disk format test failed.

1702-xx

Fixed disk read test failed.

1703-xx

Fixed disk write read compare  

test failed.

1704-xx

Fixed disk random seek test failed.

1705-xx

Fixed disk controller test failed.

1706-xx

Fixed disk drive ready test failed.

1707-xx

Fixed disk drive recalibrate test failed.

1708-xx

Fixed disk format bad track test failed.

1709-xx

Fixed disk reset controller test failed.

1710-xx

Fixed disk park head test failed.

1714-xx

Fixed disk file write test failed.

1715-xx

Fixed disk head select test failed.

1716-xx

Fixed disk conditional format  

test failed.

1717-xx

Fixed disk ECC* test failed.

* Error Correction Code

Continued...

Summary of Contents for Deskpro 386 - Desktop PC





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands